Working With Images; Combine; Split; Rotate - Sharp MXUSX5 - Desk - PC User Manual

If the document cannot be displayed as a thumbnail, it will be shown in the work area in the
following manner:
If the thumbnails do not appear as expected, select the Refresh command from the View menu to
correct the problem.

Working with Images

Combine

You can combine .TIF image documents in the work area by clicking on an image, then dragging
and dropping it on the .TIF image you want to combine it with. You can also combine .TIF
images by clicking on the images (hold down the Shift key to select multiple images), then
selecting the Combine command from the Edit menu, or from the Combine button on the toolbar.
You can also combine .SDF documents in the same manner.

Split

You can split multi-page .TIF and .SDF documents into separate documents by clicking on the
multi-page document, stepping through the thumbnail pages to the spot where you want to split,
and then select the Split command from the Edit menu or from the Split button on the toolbar.
The split will cause the selected thumbnail page to appear as the first page of the split document.

Rotate

You can rotate a .TIF image file 90 degrees to the left or to the right by clicking on the file, then
selecting the desired option from the Rotate option in the Edit menu (or from the toolbar). Note
that all images within a multi-page image document are rotated. If the .TIF file contains pages
that are Grayscale or compressed using JPEG, rotation is not permitted from Sharpdesk Desktop.
Open the file with Sharpdesk Imaging (described in "Chapter 7: Sharpdesk Imaging") to attempt
operations not permitted on thumbnails on the Desktop.
Sharpdesk User's Guide 19