Table of Contents
Advertisement
OpenVMS Enterprise Option Configuration
Configure Stop Preferences
OpenVMS Enterprise Option Configuration
Configure Port Address
58 Client Agents Guide
To configure stop preferences for the AS/400 Enterprise Option, follow these
steps:
1. From the command line, issue:
endaso
2. Press F4. The options display on the configuration screen.
3. Type your preferences and press Enter.
Other than the port address, the OpenVMS Enterprise Option does not require
additional configuration after installation.
The default TCP and UDP port addresses are both 6050. The TCP port is used
for communication and data transfer between the cprocess and the client
agent. BrightStor ARCserve Backup uses the UDP port to browse the hosts.
If you want to configure the TCP port or the UDP port, include the following
command in the bab$startup.com file:
DEFINE /SYSTEM ASO$PORT_NUMBER nnnn
In this example, nnnn is the port number of the Backup Manager.
Important! OpenVMS requires that both the UDP and TCP ports be assigned
the same port number.
Advertisement
Table of Contents
Need help?
Do you have a question about the ARB6002700WF0. ..... - BRIGHTSTOR ARCSERVE 2000 and is the answer not in the manual?
Questions and answers