Client Agent For Netware - Computer Associates ARB6002700WF0. ..... - BRIGHTSTOR ARCSERVE 2000 Manual

Installation Considerations

Client Agent for NetWare

18 Client Agents Guide
There are some limitations when performing a remote setup during a client
agent for Windows installation. The limitations are as follows:
– Windows XP—You cannot perform a remote installation on a machine
running Windows XP if the computer has been configured with the
feature Force Network Logons Using Local Accounts to Authenticate as
Guest.
– Windows XP (64-bit edition)—Remote installation is not supported.
– Windows 98 and Millennium Edition (ME)—Remote installation
and silent installation are not supported.
– Windows 2003 (64-bit edition)—Remote installation is not
supported.
If you encounter any of these situations, you can install the client agent
for Windows directly from the BrightStor ARCserve Backup installation CD.
Before installing the client agent for NetWare, review the following
considerations.
The client agent for NetWare can be installed on NetWare servers only.
Also, to perform a NetWare installation, your local machine must be
equipped with the Novell client for Windows.
The NetWare server must be configured to communicate using one of the
following network protocols:
– TCP/IP
– Internetwork Packet Exchange/Sequenced Packet Exchange (IPX/SPX)
You must have supervisor rights on the eDirectory tree of the NetWare
computer on which you are installing this client agent. For details, see
your Novell NetWare documentation.
For optimum performance, use the latest NetWare C library (CLIB) and
Systems Management Server (SMS) modules.
The NetWare Loadable Modules (NLMs) are available from the Novell web
site, http://support.novell.com.