Enterprise Option For Openvms; Install The Client Agents; Common Agent Automatic Installation - Computer Associates ARB6002700WF0. ..... - BRIGHTSTOR ARCSERVE 2000 Manual

Enterprise Option for OpenVMS

Install the Client Agents

Common Agent Automatic Installation

Before installing the enterprise option for OpenVMS, review the following
considerations.
A computer running the supported Alpha and VAX operating systems can
use either TCP or User Data Protocol (UDP) with any of the following
communications software:
– Compaq UCX 4.2 eco 3 (on Alpha)
– Compaq UCX 3.3 eco 13 (on VAX)
– Compaq TCP/IP Versions 5.0 through 5.3
– Process Software Multinet Version 4.1B (with patches) through Version
4.4
– Process Software TCPWARE Versions 5.3 and 5.4
Important! If necessary, you can install two or more of these
communications packages on the same computer; however, you can run
only one package at a time. Do not run two or more of these
communications packages simultaneously on the same computer.
Note: If you change OpenVMS TCP/IP stacks at any time, you must
reinstall the OpenVMS Enterprise Option.
You should back up your OpenVMS system disk before installing the
OpenVMS Enterprise Option.
Ensure that you have at least 10 blocks of free space for setup file.
There are two BrightStor ARCserve Backup installation CDs. To install a
windows client agent use the BrightStor ARCserve Backup r11.5 for Windows
CD. To install a cross-platform agent, use the BrightStor ARCserve Backup
r11.5 Agent CD.
For information about how to install the client agent, see the Getting Started.
When you install the client agent for UNIX, Linux, or Mac OS X, the BrightStor
ARCserve Backup Common Agent is automatically installed. The following
sections include information on the Common Agent.
Install the Client Agents
Installing the Client Agents 19