Table of Contents
Advertisement
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF
THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the product must not be disposed of as
urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from
inappropriate disposal and enables the constituent materials to be
recovered to obtain significant savings in energy and resources. As a
reminder of the need to dispose of household appliances separately,
the product is marked with a crossed-out wheeled dustbin.
troubleshooting guide
Problem
The processor will not operate
Liquidiser/mill will not operate
Processor stops during
processing
Poor performance of
tools/attachments.
Cause
No power/indicator light not lit.
Bowl not locked on correctly.
Lid not locked correctly.
Wrong base used.
Processor overloaded/maximum capacities
exceeded.
Lid unlocked.
Refer to hints in relevant "using the attachment" section. Check attachments are assembled correctly.
Solution
Check processor is plugged in
Check bowl is located correctly and the handle is
situated towards the right hand side.
Check that the lid interlock is located correctly into
the handle area.
The processor will not work if the bowl and
lid are fitted incorrectly.
If none of the above check the fuse/circuit breaker in
your home.
The mill base is not interchangeable with the
FP920/FP930 liquidiser jug. The processor
will not operate if the wrong base is fitted.
Check graphic is correct on base used.
Check maximum capacities stated under "to use your
food processor".
Check lid is locked correctly.
9
Hide quick links:
Advertisement
Table of Contents
