Gateway MAN FX510 Reference Manual page 63

www.gateway.com
3
Disconnect the fan cable from the system board. The
location of the fan connection may vary, so trace the
fan cable from the fan to the system board.
4
Remove the fan mount by pressing in on the flat area (1)
near the front, then rotating the fan mount (2) back.
1
5
Slide the old fan out of the fan mount.
6
Slide the new fan into the fan mount.
Caution
Be careful not to catch the wires connecting the power button
to the system board when rotating the fan mount. A notch has been
provided for routing these wires.
7
Insert the tabs on the rear of the fan mount into the
slots provided, then rotate the mount into place. The
mount should lock into place.
2
57