Gateway MAN FX510 Reference Manual page 106

•
You need to configure your Media Center computer to
output to a TV
•
You want to change display settings to get better TV or DVD
image quality
•
You want to know whether you can burn programs that
were recorded with your Media Center computer to a DVD
•
100
CHAPTER 6: Troubleshooting
Type of TV (interlaced or progressive scan)
Many TVs use interlaced video. Interlaced video displays
a video frame with two passes of alternating scan lines.
The TV screen first displays the video image odd lines
one at a time, sequentially from top to bottom, then it
fills in the other half of the video image with the even
lines. Because most TVs use this interlaced method to
display the picture on the screen, a standard interlaced
analog TV will most likely flicker when displaying thin
lines and small text. An interlaced video display device
will produce a lower quality display, especially when
viewing and using the Media Center computer
functions.
Progressive scan video displays a video frame with one
pass of sequential scan lines. A progressive scan TV
displays the entire picture, drawn sequentially from top
to bottom, without the odd/even interlacing. This
results in a fuller, sharper picture and better display
quality for viewing and using the Media Center
computer functions. The progressive scan picture is also
brighter and easier on your eyes.
Your Media Center computer detects whether you are
using a VGA or an S-Video display device and
automatically changes the display settings for the type
of display device you are using. For more information,
see the Gateway support Web site at:
www.gateway.com.
Adjust the display device brightness, contrast, hue, and
saturation. For more information, see the Gateway
support Web site at:
www.gateway.com.
Yes, you can. The Media Center saves recorded
programs in the DVR-MS format. You can burn a DVR-MS
file to a DVD with DVD recording (burning) software and
with the Media Center itself.