Replacing The Memory Card Reader - Gateway GT5062b Reference Manual

Replacing the memory card
reader
To replace the memory card reader:
1
2
3
4
www.uk.gateway.com
Tools
You need a Phillips screwdriver to replace the memory card reader.
Remove the side panel by following the instructions in
"Removing the side panel" on page
Remove the front bezel by following the instructions in
"Removing the front bezel" on page
Important
The color and shape of your replacement card reader's front
cover may vary from your original card reader.
Slide the top bezel toward the front of the computer
about 3/4 inch, then remove it from your computer.
Remove the two screws that secure the card reader to
the computer.
37.
38.
Screws
47