Remote Start Features; Disabling Remote Start; Remote And System Operations; Out Of Range - Viper 4708V Owner's Manual

Remote Start Features

Refer to the Quick Reference Guide for more information on
remote start features that are specific to each vehicle.

Disabling Remote Start

Remote start can be disabled by moving the Toggle Switch to the Off
position. If remote start is attempted while Off, the engine will not start.
Move the switch back to the On position to resume normal operation.
Note Consult your local 12-volt retailer for the location of Toggle
switch.

Remote and System Operations

Out of Range

Each time a command is performed the remote will expect a com-
mand confirmation from the system. If a command confirmation is not
received the out-of-range icon (
alert.

No Remote Output

Occasionally when a command is performed the remote may not
generate a command confirmation output or Out of Range output.
This indicates that the system received the command but it was an
incomplete command (e.g. Aux button pressed too short to activate
the trunk release) or it was an illegal message (e.g. the command
was corrupted due to local RF interference). These are temporary nor-
mal functions of the system and remote, perform the command again
within 10 seconds to return to normal operation.
© 2012 Directed. All rights reserved.
) and a fault tone will play as an
13