Using The 1-Way Companion Remote; Accessing Commands; Button Auto Lock; Programming - Viper 4708V Owner's Manual

Owner manual

Hide thumbs Also See for 4708V:

Table of Contents

Available languages

Using the 1-Way Companion Remote

The companion 1 way remote commands the system features as

shown in the previous table, but without the message display of the

Responder LC3 remote. Parking light ﬂashes is used to indicate that a

command has been received and activated as described in the Basic

and Advanced command sections.

Similar to the Responder LC3 remote, Basic commands are performed

when a command button is pressed directly. To perform Advanced

Commands press the

button 1 to 4 times to access function levels,

x4 in the table for example implies pressing

4 times. The

LED ﬂashes in groups for a few seconds to indicate the level. Press

the desired command button while the LED is ﬂashing to perform the

command.

When On, the remote control buttons lock if more than 20 seconds

lapses between button presses. If a button is pressed when locked,

a fault tone is emitted. To unlock the buttons; press the

button fol-

lowed by the

button, the buttons unlock and tones play to conﬁrm.

To enter; hold the

button for 8 seconds, the remote emits one long

beep and turns the LED on, the programming main menu has been

accessed.

Table of Contents

Table of Contents