Remote Start Features
Pit Stop Mode
To exit vehicle with engine running
The system keeps the engine running during short trips into the house
or convenience store. To perform Pit Stop:
1.
With the engine running,
foot brake.
Press
2.
the
REMOTE START ON
Turn
the key to off, and remove it from the ignition, the engine
3.
continues running for the programmed runtime.
Exit
the vehicle and arm the alarm.
4.
Note
For Pit Stop on manual transmission vehicles follow the direc-
tions in the Manual Transmission Start (MTS mode) section.
Key Takeover
When you are ready to drive
The system keeps the engine running until the vehicle is ready to be
driven. To perform Key Takeover:
Disarm
the system and enter the vehicle, do not step on the foot
1.
brake.
Insert
the key, turn it to the run position, and then step on the foot
2.
brake, the remote start then turns off.
3.
The parking lights turn off to indicate remote start is off, and
34
set the parking brake and release the
button, the parking lights will turn on and the
message will play on the remote control.
© 2009 Directed Electronics. All rights reserved.