ZyXEL Communications NBG2105 User Manual page 30

Chapter 3 Operation Modes
Figure 11 Navigation Panel: WISP+UR Mode
The following table describes the sub-menus.
Table 8 Navigation Panel: WISP+UR Mode
MENU
Wizard
Network
LAN
WAN
QoS
Dynamic
DNS
Wireless LAN
Basic
Advanced
Security
Site Survey
WPS
30
FUNCTION
The Web Configurator's wizard setup helps you configure your device in WISP+UR mode
for the first time.
Use this to configure LAN IP address and subnet mask.
Use this allows you to configure ISP parameters, WAN IP address assignment, DNS servers
and the WAN MAC address.
Use this to reserve bandwidth for certain traffic based on the IP address or MAC address.
Use this to configure a domain name with a dynamic IP address.
Use this to turn the wireless connection on or off and make other basic configuration
changes.
Use this to configure the output power and set the RTS/CTS Threshold.
Use this to configure no, WEP, WPA-PSK, WPA2-PSK or WPA2-PSK Mixed wireless
encryption.
Use this to scan for and connect to a wireless network automatically.
Use this to quickly set up a wireless network with strong security, without having to
configure security settings manually.
NBG2105 User's Guide