ZyXEL Communications NBG2105 User Manual page 46

Chapter 6 Client Setup Wizard
Figure 26 Wireless Network Name Setup
The following table describes the labels in this screen.
Table 20 Wireless Network Name Setup
LABEL
Wireless Network
Name (SSID)
Channel
Site Survey
SSID
BSSID
Channel
Type
Encrypt
Signal
Select
Cancel
46
DESCRIPTION
Enter the SSID of the AP to which you want the NBG2105 in client mode to connect.
Enter the channel number used by the wireless device to which the NBG2105 is
connecting. This is optional if the AP does not broadcast and hides the SSID.
Click this to search for available wireless devices within transmission range and update
this table.
This shows the SSID of the wireless device.
This shows the MAC address of the wireless device.
This shows the channel number and wireless standard used by this wireless device.
This shows the type of device found in the survey.
This displays the data encryption and authentication method used by this wireless
device.
This displays the strength of the wireless signal. The signal strength mainly depends on
the antenna output power and the distance between your NBG2105 and this device.
Click this to select a device.
Click this to cancel the wizard.
NBG2105 User's Guide