ZyXEL Communications NBG2105 User Manual page 98

Chapter 13 Wireless LAN
Figure 61 Wireless LAN > MAC Filtering
The following table describes the labels in this screen.
Table 50 Wireless LAN > MAC Filtering
LABEL
Wireless Access
Control Mode
MAC Address
Comment
Apply Changes
Reset
Current Access Control List
MAC Address
Comment
Select
Delete Selected
Delete All
Reset
98
DESCRIPTION
Select Disable to turn off MAC address filtering, or define the filter action for the list of
MAC addresses in the Current Access Control List.
Select Allow Listed to permit access to the NBG2105, MAC addresses not listed will be
denied access to the NBG2105.
Select Deny Listed to block access to the NBG2105, MAC addresses not listed will be
allowed to access the NBG2105.
Enter the MAC address for this access control entry.
Enter a description of this access control entry.
Click this to save changes back to the NBG2105.
Click this to begin configuring this screen afresh.
This shows the MAC address of the wireless station that is allowed or denied access to
the NBG2105.
This shows a description of this access control entry.
Click this to select this rule.
Click this to delete the selected rules.
Click this to delete all rules.
Click this to reset all selections.
NBG2105 User's Guide