ZyXEL Communications NBG2105 User Manual page 26

Chapter 3 Operation Modes
Figure 7 Navigation Panel: Access Point Mode
The following table describes the sub-menus.
Table 6 Navigation Panel: Access Point Mode
MENU
Wizard
Network
LAN
Wireless LAN
Basic
Advanced
Security
WPS
MAC Filtering
Management
NTP
Password
Upgrade
Firmware
Backup/
Restore
Operation
Language
Reboot
26
FUNCTION
The Web Configurator's wizard setup helps you configure your device in AP mode for the
first time.
Use this to configure LAN IP address and subnet mask and DHCP server settings.
Use this to turn the wireless connection on or off and make other basic configuration
changes.
Use this to configure the output power and set the RTS/CTS Threshold.
Use this to configure no, WEP, WPA-PSK, WPA2-PSK or WPA2-PSK Mixed wireless
encryption.
Use this to quickly set up a wireless network with strong security, without having to
configure security settings manually.
Use this to allow or deny wireless stations based on their MAC addresses from connecting
to the NBG2105.
Use this to change your NBG2105's time and date.
Use this to change your NBG2105's system password.
Use this to upload firmware to your NBG2105.
Use this to view information related to factory defaults, backup configuration, and
restoring configuration.
Use this to change between access point mode and router mode.
Use this to select the language you prefer.
Use this to restart the NBG2105 without turning the power off.
NBG2105 User's Guide