ZyXEL Communications NBG2105 User Manual page 96

Chapter 13 Wireless LAN
Figure 59 Wireless LAN > WPS (Router, AP, or WISP+UR mode)
The following table describes the labels in this screen.
Table 48 Wireless LAN > WPS (Router, AP, or WISP+UR mode)
LABEL
Disable WPS
Apply Changes
Reset
WPS Status
Reset to
UnConfigured
Self PIN Number
Start PBC
Station PIN number
Start
Current Key Info.
Authentication
Encryption
Key
96
DESCRIPTION
Select this to turn off the WPS feature.
Click this to save changes back to the NBG2105.
Click this to begin configuring this screen afresh.
This displays Configured when the NBG2105 has connected to a wireless network
using WPS or when WPS is enabled and wireless or wireless security settings have been
changed. The current wireless and wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the NBG2105 or you click Release Configuration to remove the
configured wireless and wireless security settings.
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for
WPS connections on the NBG2105.
This is the WPS PIN (Personal Identification Number) of the NBG2105. Enter this PIN in
the configuration utility of the device you want to connect to the NBG2105 using WPS.
The PIN is not necessary when you use WPS push-button method.
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless stations's wireless settings.
Click this to start WPS-aware wireless station scanning and the wireless security
information synchronization.
Type the same PIN number generated in the wireless station's utility. Then click Start
to associate to each other and perform the wireless security information
synchronization.
Use this button when you use the PIN Configuration method to configure wireless
station's wireless settings.
This shows the current authentication method being used by WPS.
This shows the current encryption method being used by WPS.
This shows the current encryption key being used by WPS.
NBG2105 User's Guide