Memory; Memory Card Reader; Modem (Dial-Up) - Gateway M305 User Manual

Memory

You see a "Memory error" message
■ Make sure that the memory modules are inserted correctly in the memory
bay slots. For more information, see
page 243.
■
Use PC Doctor or a third-party diagnostic program to help determine if a
memory module is failing. For more information, see
memory" on page
You see a "Not enough memory" error message
■ Close all programs, then restart your notebook.
Help and
Support

Memory card reader

Drive letters for the memory card slots do not appear in the My
Computer window
■
Reboot your notebook.

Modem (dial-up)

Your modem does not dial or does not connect
■ Make sure that the modem cable is plugged into the modem jack and not
the Ethernet network jack. See
connections have been made correctly.
■ Make sure that your notebook is connected to the telephone line and the
telephone line has a dial tone.
■ Make sure that the modem cable is less than 6 feet (1.8 meters) long.
■ Remove any line splitters or surge protectors from your telephone line,
then check for a dial tone by plugging a working telephone into the
telephone wall jack.
243.
For more information about troubleshooting memory errors
in Windows XP, click Start, then click Help and Support.
Type the keyword memory error in the Help and Support
Search box
"Back" on page 6
www.gateway.com
"Adding or replacing memory" on
"Adding or replacing
, then click the arrow.
to make sure that the
Troubleshooting
265