m
Place sidebumer wind diverter over
sidebumer. Align notch in diverter to
fit around electrode. Place burner
cap onto sideburner. Place
sidebumer cooking grate onto
sidebumer shelf, aligning grate legs
with holes on shelf.
Burnercap
Sidebumerwind d ive_er
80005038
Insideof cart, insert ends of left and right grease tray rails into slots between upper and lower back panels near grease tray
opening.Attach opposite ends of rails to bottom edge of front brace using one #8x318" self-tapping screw per rail. To the left
of the rails, repeat this procedure to install the tank heat shield. Attach heat shield to front brace using two #8x3/8" self-
tapping screws.
461262006 • 19