Typical Layouts - Pts/U Series - Space-Ray PTS Series 100 Installation And Operation Instructions Manual

7.0) TYPICAL LAYOUTS – PTU / PTS Series
MODEL
PTS 40/25
PTS 50/30
PTS 75/50
PTS 100/65
PTS 125/80
PTS 150/100
PTS 175/110
PTS 200/125
NOTES:
1) In all configurations, the control unit must be connected directly to either a) the 24-hole flange of the 10 ft.
aluminized steel starting body section (for 10 ft., 20 ft., and 30 ft. systems) or b) the 6-hole flange of the 10 ft.
alumi-therm steel starting body section (for 40 ft., 50 ft., 60 ft., and 70 ft. systems.
2) Joining of two 90º elbows directly together to form a "Z" shape IS NOT permitted.
3) PTS / U 175/110 - 40 ft length available for special applications.
4) 5 Ft. Body Packages may be utilized on any of these heaters to yield heater lengths from 15 ft. to 70 ft.
5) Any configuration of components not shown in the illustrations may be used except as noted in 1 and 2
Form #43343530
July 08
EMITTER LENGTH
Min. Max.
10 Ft. 20 Ft.
20 Ft 30 Ft.
20 Ft. 30 Ft.
30 Ft. 40 Ft.
30 Ft 50 Ft.
40 Ft. 60 Ft.
50 Ft. 70 Ft.
50 Ft. 70 Ft.
MODEL
PTU 40/25
PTU 50/30
PTU 75/50
PTU 100/65
PTU 125/80
PTU 150/100
PTU 175/110
PTU 200/125
–11–
BODY LENGTH
Min. Max.
10 Ft. 10 Ft.
10 Ft. 15 Ft.
10 Ft. 15 Ft
15 Ft. 20 Ft.
15 Ft. 25 Ft.
20 Ft. 30 Ft.
25 Ft. 35 Ft.
25 Ft. 35 Ft.