Performing Re-Sewing - JUKI MEB-3810 Instruction Manual

6-4. Performing re-sewing

Sewing can be performed without cloth-opening operation of the presser foot.
1
<Mode setting screen>
1
<Sewing mode setting screen>
2 Carry out sewing with the Presser foot switch and the Start switch. When the before-cut knife operates,
the cloth open mechansm opens after the completon of the operaton of the cloth cuttng knfe. In the
case of the after-cut knife/without knife, the cloth open mechanism opens simultaneously with the start of
sewng. The cloth open mechansm closes upon the completon of sewng.
(2) re-sewing mode (when the Sewing mode is set to "1")
1 Press the Ready key
position selection" is set to "front", the feed bar keeps resting at the origin of the cloth cutting knife operat-
ng poston. The cloth open mechansm remans open.
2 The cloth open mechanism remains open even when sewing is performed with the Presser foot switch
and the Start swtch.
(3) cloth open mode (when the Sewing mode is set to "2")
1 Press the Ready key
stion selection" is set to "front", the feed bar travels to the near set position. The cloth open mechanism
remans open.
2 The cloth open mechanism remains open even when sewing is performed with the Presser foot switch
and the Start swtch.
1. In the case the cloth cutting knife is not operated, knife operation should be prohibited by
means of the Knife oN/oFF key
porarily not desired" p.42
2. to set the material setting position to the front side, refer to
tion of cloth"
3
7
6
Step of operation
described in 2)
3
7
6
!1
1 to retrieve the origin of the feed bar/needle bar. Even in the case "cloth set
1 to retrieve the origin of the feed bar/needle bar. In the case "cloth set po-
for the procedure.
p.70.
If the Sewing LED stays oN, press the
ready key
1) Press Mode key
ting screen. Press –/BACKWARD key
or +/FORWARD key
2) Press Ready key
mode settng screen.
3) Set the sewing mode to "0", "1" or "2" by pressng
–/BACKWARD key
7 .
4) Press Ready key
you press Mode key
set wll be cancelled.
5) While "oPEn" is shown on the screen, press
Mode key 3 to return to the normal dsplay.
Sewing machine operation under each sewing mode
(1) Normal mode (the sewing mode is set to "0",
i.e., the power-on state)
1 Press the Ready key
gin of the feed bar/needle bar. In the case mem-
ory swtch No. 12 "Cloth set position selection" is
set to "front", the feed bar travels to the near set
position (memory switch No. 23). The cloth open
mechansm s closed.
. refer to "6-7. When dropping of the knife is tem-
!1
"9-2. changing the setting posi-
– 40 –
to turn it oFF.
1
3 to dsplay the mode set-
7 to display "oPEn".
1 to dsplay the sewng
6 or +/FORWARD key
1 to fnsh settng. If
3 , the data you have
1 to retrieve the ori-
6