Height Of The Throat Plate; Adjusting The Height Of The Throat Plate - JUKI MEB-3810 Instruction Manual

10-8. Height of the throat plate

(1) Height of the throat plate
1

(2) adjusting the height of the throat plate

The heght of the throat plate should be adjusted n the followng procedure.
4
3
5) After the completion of the throat plate height, return gimp guide 4 to ts home poston and tghten screw
3 .
2
2
5
6
− 81 −
Install the throat plate at the poston where top sur-
face 2 of the throat plate is 0.4 mm below top sur-
face 1 of the support plate.
2
6
1) Loosen screw 3 and
shft gmp gude 4 .
2) Loosen throat plate
setscrew 5 to remove
throat plate 2 .
3) Adjust the height of the
throat plate by turn-
ng screw 6 located
under the throat plate
to change the screw
heght.
4) Adjust the screw height
so that the heght of
the throat plate and
t h a t o f w o r k c l a m p
support plate 1 are
a d j u s t e d t o 0 . 4 m m
and fix the throat plate
2 wth ts undersde
pressed aganst screw
6 .