Parts List; How To Assemble - Eureka 2940-2969 Owner's Manual

(some models onl
(eertains modules seulement)
(s61oaigunos modeios)
V
1
(some models only)
(eertains modeles seulement)
(s81oalgunos modelos)
PARTSLIST
(FIG.1)
Q Wandand crevicewand(pull apart)
_) Dustingbrush
Hose
Vacuumcleaner body
O Electrical cord
Handle
_) Self-cleaning duster (some models only)
_]}Turbo tool ( some models only)
O Screwslocated intheaccessory package
Carry h andle a ssembly
HOWTO ASSEMBLE
CAUTION: Assemblethe cleanerbefore using.
CAUTION: Movingparts.Make sure ON/OFF switch is in the OFF
positionbefore pluggingin.
Step 1: Slide the handleintothe hole as pictured (FIG.2).
Step 2: Slide the carry handleintoplaceas pictured;securewith 2
screws provided(FIG.3).
Step 3: PuiIthe electricalcord up to the cord retaineron the back of the
loopedhandleand firmly pushdown intoretainer.This will keep
the cord out of the way the next time you vacuum.
Step 4: Windthe cord aroundthe two cord hookson the back of the
vacuum.
Step 5: Secureplug to the cord to prevent unwinding.
Step 6: Placethe hoseon the back of the vacuum,wrapping it up and
over the hosehookas shown (FIG.4).
Step 7: Securethe bottomof the self cleaningduster (somemodels)to the
bottomhose;fastenintoplaceby tighteningthe screw.Firmlypush
the end of the strechhoseintothe top of the self cleaningduster.
Step 8: Storethe wands on the side of the vacuuminfront of the hose
(FIG.5).
Step 9: Storethe dusting brushon its holder(FIG.6).