Cisco Unified Ip Phone 7900 Series Release Notes For Firmware Release 9.3(1)Sr2; New And Changed Features; Firmware Release 9.3(1)Sr2 Security Enhancements; Related Documentation - Cisco Unified 7900 Series Release Notes

Release notes for firmware release 9.3(1)sr2

Hide thumbs Also See for Unified 7900 Series:

Table of Contents

Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2

The following sections describe the new and changed features in this release.

Firmware Release 9.3(1)SR2 contains the following security enhancements:

• The phone does not request authorized key information from the TFTP server. Without the authorized

• The debugging settmask commands are added to the phone debug shell. Making the commands available

• The ability to log into a default user account has been removed. Phone debugging can only be performed

• The ability to log into the phone from the AUX port on the phone has been removed.

This feature had no user impact.

See the publications that are specific to your language, phone model, and Cisco Unified Communications

Manager release. Navigate from the following documentation URL:

http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html

See the Cisco Unified Communications Manager Documentation Guide and other publications that are specific

to your Cisco Unified Communications Manager release. Navigate from the following documentation URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

See the Cisco Business Edition 5000 Documentation Guide and other publications that are specific to your

Cisco Business Edition 5000 release. Navigate from the following URL:

http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html

keys, the administrator must enter the SSH user id and password to connect to the phone for debugging.

in the debug shell removes the need for the default user account.

using the debug account.

Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2

New and Changed Features

Table of Contents