Install Cisco Unified Communications Manager Device Packs; Install Firmware Release On Cisco Unified Communications Manager - Cisco Unified 7900 Series Release Notes
Release notes for firmware release 9.3(1)sr2
Hide thumbs
Also See for Unified 7900 Series:
- System manual (36 pages) ,
- User manual (11 pages) ,
- Solution manual (10 pages)
Table of Contents
Advertisement
Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2
To download and install the Cisco Unified Communications Manager version, perform these steps.
Procedure
Step 1
Go to the following URL:
http://www.cisco.com/cisco/software/navigator.html?mdfid=268439621&catid=278875240
Step 2
Choose your Cisco Unified Communications Manager version.
Step 3
Choose the appropriate software type.
Step 4
Hover over the desired file. When the popup window displays, click the Readme link to open the readme file.
Step 5
Choose Download or Add to cart for the desired file.
Step 6
Use the instructions in the readme file to install the updated file on the Cisco Unified Communications Manager.
Install Cisco Unified Communications Manager Device Packs
Device packs are required to enable IP phones in the Cisco Unified Communications Manager database. For
information about compatible device packs, see
compat/devpack_comp_mtx.html.
For Cisco Unified CallManager 4.2 and earlier, these device packs are required. For Cisco Unified CallManager
4.3 and Cisco Unified Communications Manager 6.0 and later, you must run the device pack and reboot the
Cisco Unified Communications Manager server.
To install the device packs, follow these steps.
Procedure
Step 1
Go to the following URL: .
http://www.cisco.com/cisco/software/navigator.html?mdfid=268439621&flowid=21301
Step 2
Choose your Cisco Unified Communications Manager version.
Step 3
Hover over the desired device pack. When the popup window displays, click the Readme link to open the
readme file.
Step 4
Choose Download or Add to cart for the desired device pack.
Step 5
Use the instructions in the readme file to install the updated device pack on the Cisco Unified Communications
Manager.
Install firmware release on Cisco Unified Communications Manager
Before using the Cisco Unified IP Phone 7900 Series Firmware Release 9.3(1)SR2 with Cisco Unified
Communications Manager, you must install the latest firmware on all Cisco Unified Communications Manager
servers in the cluster.
Install Cisco Unified Communications Manager Device Packs
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/
Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2
5
Advertisement
Table of Contents
