Advanced Operations; Dtmf (Dual Tone Multi Frequency) Calls - Kenwood NEXEDGE NX-200 Instruction Manual

DTMF (DUAL TONE MULTI FREQUENCY) CALLS

■ Making a DTMF Call
(NX-200/300/200G/300G/205G/305G Only)
Manual Dialing (Keypad Models Only)
1 Press and hold the PTT switch.
2 Enter the desired digits using the DTMF keypad.
If you release the PTT switch, transmit mode will end even
•
if the complete number has not been sent.
• If the Keypad Auto PTT function has been enabled by
your dealer, you do not need to press the PTT switch to
transmit; you can make the call simply pressing the DTMF
keys.
Store & Send
1 Press the key programmed as Autodial.
2 Enter up to 30 digits using the DTMF keypad.
• Alternatively, you can enter digits by using
3 Press the PTT switch to make the call.
■ Autodial (NX-200/300/200G/300G/205G/305G Only)
Autodial allows you to quickly call DTMF numbers that have
been programmed onto your transceiver.
1 Press the key programmed as Autodial, or access the
Menu {page 15}.
• The first entry in the Autodial list appears on the display.
2 Press
number, or enter the list number directly (01 ~ 32).
• The stored entry appears on the display.
3 Press the PTT switch to make the call.

ADVANCED OPERATIONS

/ to select your desired Autodial list
/
23