Dtmf (Dual Tone Multi Frequency) Calls; Making A Dtmf Call; Auto Dialing; Manual Dialing - Kenwood TK-760G Instruction Manual

DTMF (DUAL TONE MULTI FREQUENCY) CALLS

MAKING A DTMF CALL

Note: To make a DTMF call, you must have an optional microphone with a DTMF keypad. Ask your
dealer for more information.
There are three ways of making a DTMF call:

• Auto dialing

• Manual dialing

• Store and send dialing

Auto dialing
1 Press * key on DTMF microphone.
2 Press one of numeric key, 1~9.
• Preprogrammed numbers appears on the display.
3 Push PTT to send the numbers
Note:
Maximum length of the proprogrammed number is 16 digits.
Manual dialing
1 Press and hold the PTT switch.
2 Enter the desired digits using the microphone keypad.
• The corresponding DTMF tones sound each time you press a key.
• If you release the PTT switch, transmit mode will end even if the complete number
has not been sent.
• If your dealer has activated the Keypad Auto PTT function, you need not hold down
the PTT switch while pressing the keys on the keypad. The DTMF code will be
sent automatically when you press a key.
Store and send dialing
1 Enter the desired digits using the microphone keypad.
• The digits appear on the display as you enter them.
2 After entering the complete number, press the PTT switch.
• The DTMF code is transmitted after pressing the PTT switch.
Note:
Store and send must first be activated by your dealer in order for it to function.
You can only store up to 16 digits before sending. Entering more than 16 digits will cause an error
tone to sound.
In store and sending mode, if you switch the power OFF before sending the number, the number will
be cleared from memory.
13