Cleaning The Glass Cooktop - GE JBS07 Owner's Manual And Installation Instructions

Cleaningthe glass cooktop, son,e mode/sl
ii _iiiii
Cleanyour cooktepafter
each spill. Use CERAMA
BRYTE c*Ceramic Cooktep
Cleaner.
Normal Daily Use Cleaning
ONLY use CE]L_dMABRYTE_)Ceran]ic
Cooktop Cleaner on the glass cooktop.
Other creams ma) not be as eflectixe.
To maintain and protect tile surti_ce of yore"
glass cooktop,
tOllow these
steps:
[] Before using the cooktop fin" the
fi_t time, clean it with CEIL_dMA
BRYTE '_Ceramic Cooktop Cleane_:
This helps protect tile top and makes
cleanup easier:
[] Daily use of CEILBdMA BRYTE <_>
Ceramic Cooktop Cleaner will help
kee I) the cooktop looking
new.
[] Shake tile cleaning cream well. Apply
a fi_w drops of CEILBd_4A BP.YTE e_
Ceramic Cooktop Cleaner dire{'tlv to
the cooktop.
[] Use a paper towel or CEILBdMA
BRYTE _' Cleanino Pad fiw Ceramic
()}oktops to clean tile entire cooktop
S/lltil{'e.
[] Use a drx cloth or paper towel
to remoxe all cleanino residue.
No need to rinse.
NOTE:It is veryimportantthat you DONOTheat
thecooktopuntil it hasbeencleanedthoroughly
Use a CERAMA BRYTE '_ Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
WARNING:DAMAGE to yourglasssurfacemay
occurif youusescrubpads otherthan those
recommended.
[] Allow tile cookto I) to cool.
[] Spread a few drops of CEIL_MA
BRYTE (_)Ceramic (_ooktop Cleaner
(m tile entire burned residue area.
[]
Using tile included CEI{_d'dA
BRYTE (_) ( 2leaning Pad for Ceramic
(_{}oktops, rub tile residue area,
alI, ))lving, i)resstlYe as needed.
[]
[]
If any residue remains, repeat tile
steps listed above as needed.
For additional protection, after
all residue has been remoxed, polish
tile entire surfi_ce with CEI_/IA
BRYTE ') Ceramic (_ooktop Cleaner
and a paper towel.
The CERAMA BRYTE '*_Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Center.
See instructions under "To Order
Parts" section on next page.
NOTE.: D o not use a dull or
nicked blade.
Heavy, Burned-On Residue
[] Allow tile {'ooktop to cool.
[] Use a single-edge razor blade
scraper at approximately a 45 ° angle
against the glass surtace and scrape
the soil. It will be necessary to apply
presstlre to tile i'_lzoi" scraper in
order t{} remove tile residue.
[]
After scraping with tile razor
scrape_; spread a few drops of
(;EI_Bd_4A BRYTE '_Ceramic Cooktop
Cleaner (m tile entire burned residue
area. Use tile (;EI_Bd_A
BRYTE '_
Cleaning Pad to remove any
remaining residue.
[]
For additional protection,
alter all residue has been remoxed,
polish tile entire surface with
CEIL_dMA BRYTE <_' Ceramic Cooktop
Cleaner and a paper towel.
32