Generic Dial-Up Method - Non-Windows - Multitech MultiModem Cell MTCBA-E1 User Manual
Wireless modem
Hide thumbs
Also See for MultiModem Cell MTCBA-E1:
- User manual (37 pages) ,
- User manual (37 pages) ,
- User manual (39 pages)
Table of Contents
Advertisement
Chapter 3 – Using your Wireless Modem
Generic Dial-Up Method - Non-Windows
1.
If CDMA, dial onto the network using AT#777
2.
If GPRS/EDGE:
a.
To set up an Access Point Name (APN) enter:
AT+CGDCONT=1, "IP","<APNSERVER>"
Where <APNSERVER> is the APN server supplied by your carrier
b.
dial onto the network using AT*99***1#
Serial Baud Rate
Your MultiModem Cell is defaulted to a serial baud rate of 115200 from the factory. To enjoy faster baud rates, you can
manually set the modem to a higher speed (230400, 460800, or 921600) using the AT+IPR=<baudspeed>. However, you
must make sure the host serial port is capable of the new speed. If the new speed is set and the host hardware is not capable
of the higher speed, you will need to find a host that is capable.
22
Multi-Tech Systems, Inc. MultiModem Cell User Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiModem Cell MTCBA-E1 and is the answer not in the manual?
Questions and answers