IBM ThinkPad TransNote Servce And Troubleshooting Manual page 28

In Windows 2000, a password is required to be set. This password is entered
when you start your computer, or resume from standby or hibernation. If you
are using Windows 2000, you need only set the Windows password for
security purposes. The TouchBoard on-screen keyboard can be used to enter
this password.
Note: If you set a power-on password, you will be prompted to enter this
If you are using Windows 98, you need only set the power-on password for
security purposes. An on-screen keyboard will appear when you start your
computer, or resume from hibernation. Use this keyboard to enter your
password when prompted.
Note: If you set a Windows password and are using Windows 98, the
20
®
ThinkPad TransNote
password in addition to the Windows password when the computer
starts or returns from hibernation mode.
TouchBoard on-screen keyboard will not appear when you are
prompted to enter a password.
™
Service and Troubleshooting Guide