Husqvarna SG13A Operator's Manual page 25

Stump grinder
Hide thumbs Also See for SG13A:
Table of Contents

Advertisement

OPERATION
Engine switch on the handle
Set the toggle switch to ON.
Dead man's grip bar
Hold in the bar for the dead man's grip against the
handle.
8011-185
Starter handle
The dead man's grip must be pressed in when
starting the engine.
Misuse of the starter handle can damage the starter.
DO NOT twist the starter cord around your hand.
Pull out the handle slowly until the gears mesh.
Then give a sharp pull on the starter handle. DO
NOT pull out the starter cord completely and DO
NOT let go of the starter handle when extended.
8011-127
Throttle
Keep the throttle at idle. When the throttle is
increased, the cutting wheel will begin rotating.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sg13/968999353

Table of Contents