Radar Display Settings - Garmin GPSMAP 190-01120-00 Owner's Manual

Setting True or Apparent Wind for the Sailing Data Bar
You should show the sailing data bar before you configure it
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, or
Menu Radar Setup
3. Select >
4. Complete an action:
• Select Wind > Apparent
• Select Wind > true
Wind VMG and Waypoint VMG in the Data Bars
See "How Wind VMG and Waypoint VMG Appear in the Data Bars"
Showing the Compass Tape Data Bar
The compass tape data bar appears in a row across the top of the Radar screen, above the navigation
data bar. It shows the current heading, and an indicator that shows the bearing to the desired course
appears while navigating.
1. From the Home screen, select Charts.
2. Select Cruising, Harbor, or
Menu Radar Setup
3. Select >

Radar Display Settings

Setting the Radar Color Scheme
You can set the color scheme used for all Radar screens. This setting does not apply to the Radar
Overlay.
1. From the Home screen, select
2. Select White, Black
Setting the Radar Display Orientation
You can set the perspective of the radar display. The orientation setting applies to every radar mode.
This setting does not apply to the Radar Overlay.
1. From the Home screen, select
2. Complete an action:
• Select North Up
Head Up
• Select
heading sensor, also known as the magnetic heading. The heading line appears vertically on
the screen.
Course Up
• Select
GPSMAP 6000/7000 Series Owner's Manual
®
offshore mode.
Data Bars
>
to show the flow of air experienced while on a boat in motion.
to show the flow of air experienced while on a stationary boat.
offshore mode.
Data Bars
>
Radar Radar Setup
>
(for night mode colors), or Blue.
Radar Radar Setup
>
to set the top of the map to a north heading.
to set the top of the map according to the heading data received from a
to set the map so the direction of navigation is always up.
(page 92).
> Sailing.
Compass tape > on.
>
Appearance
>
Appearance
>
(page 65).
Color Scheme.
>
> orientation.
Radar