Table of Contents
Advertisement
Clearing the Active Track
From the Home screen, select
The track memory is cleared, and the current track continues to be recorded.
Managing the Track Log Memory During Recording
1. From the Home screen, select
Record
Mode.
2. Complete an action:
•
Select
Fill
to record a track log until the track memory is full.
•
Select
Wrap
to continuously record a track log, replacing the oldest track data with new data.
Configuring the Recording Interval of the Track Log
You can indicate the frequency at which the track plot is recorded. Recording more-frequent plots is
more accurate but fills the track log faster.
1. From the Home screen, select
Interval
> Interval.
2. Complete an action:
•
Select
Distance
the distance. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad. For the
GPSMAP 7000 series, use the on-screen keyboard. Select Done.
•
Select
time
to record the track based on a time interval. Select
the GPSMAP 6000 series, use the Rocker or the Numeric Keypad. For the GPSMAP 7000
series, use the on-screen keyboard. Select Done.
•
Select
Resolution
is recommended for the most-efficient use of memory. Select
error allowed from the true course before recording a track point. For the GPSMAP 6000
series, use the Rocker or the Numeric Keypad. For the GPSMAP 7000 series, use the on-
screen keyboard. Select Done.
3. Select Done.
Copying Tracks
See "Chartplotter Data Management"
Deleting All Saved Waypoints, Routes, and Tracks
From the Home screen, select
Navigating with a Garmin Autopilot
When you start any type of navigation (Go To, Route To, Guide To, or Follow Track), if you are
connected to a compatible Garmin autopilot (such as the GHP
autopilot.
GPSMAP
6000/7000 Series Owner's Manual
®
Information
Information
Information
to record the track based on a distance between points. Select
to record the track plot based on a variance from your course. This setting
(page
Information
User Data
tracks
>
>
User Data
tracks
>
>
User Data
tracks
>
>
Change
69).
User Data
Clear User Data
>
>
10), you are prompted to engage the
™
Navigation
Clear Active
track.
>
Active track options
>
Active track options
>
Change
Change
to set the time. For
to enter the maximum
> All.
>
>
to set
Hide quick links:
Advertisement
Table of Contents
