Viewing The Event Log; Saving System Information To A Memory Card; Restoring The Original Chartplotter Factory Settings; Communication With Wireless Devices - Garmin GPSMAP 190-01120-00 Owner's Manual

Appendix

Viewing the Event Log

The event log shows a list of system events.
From the Home screen, select

Saving System Information to a Memory Card

You can save system information to a memory card as a troubleshooting tool. A Garmin Product
Support representative may ask you to use this information to retrieve data about the marine
network.
1. Insert a memory card into the SD card slot on the chartplotter.
Configure
2. Select >
3. Remove the memory card.

Restoring the Original Chartplotter Factory Settings

Note: This procedure deletes all settings information you have entered.
1. From the Home screen, select
Reset.
2. Select Yes.

Communication with Wireless Devices

Connecting a Wireless Device
You can allow wireless devices, such as a remote control or an optical mouse, to communicate with
the chartplotter.
From the Home screen, select
Connections > Yes.
Disconnecting a Wireless Device
1. From the Home screen, select
2. Select a wireless device.
3. Select Disconnect.
Garmin Marine Network
The Garmin Marine Network allows you to share data from Garmin peripheral devices with Garmin
chartplotters quickly and easily. You can connect a GPSMAP 6000/7000 series chartplotter to a
Garmin Marine Network to receive data from and share data with other Marine Network-compatible
devices and chartplotters.
Transferring Data over the Garmin Marine Network
See "Chartplotter Data Management"
Configuring Networked Devices
See "Networked Device Configuration"
6
Configure >
System System Information
>
Configure >
Configure
>
Configure
>
(page
(page
System > System Information
Save to Card.
>
System > System Information
Communications Wireless Devices
>
Communications Wireless
>
69).
71).
GPSMAP
®
> event Log.
> Factory Settings
New
>
Devices.
6000/7000 Series Owner's Manual
>