Garmin GPSMAP 190-01120-00 Owner's Manual page 62

Almanac, Environmental, and On-boat Data
Configuring the VGA Display
Before you can configure the VGA display mode on a GPSMAP 7015 or 7215 chartplotter, you must
set the video Source setting to VGA Input
1. From the Home screen, select
2. Touch anywhere on the screen.
An on-screen display appears.
3. Complete an action:
• Touch the brightness arrows to adjust the screen brightness.
• Touch the contrast arrows to adjust the screen contrast.
Exiting the VGA Display
1. From the Home screen, select
2. Touch anywhere on the screen.
An on-screen display appears.
3. Touch the display mode icon in the upper-left corner.
The video menu appears.
4. Select Source.
5. Select a new value for the video Source setting
6
(page 55).
Information > Video.
Information > Video.
(page 55).
GPSMAP 6000/7000 Series Owner's Manual
®