Routes - Garmin GPSMAP 190-01120-00 Owner's Manual

• Select Water temp. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad
to change the water temperature. For the GPSMAP 7000 series, use the on-screen keyboard.
Select Done.
• Select Comment. For the GPSMAP 6000 series, use the Rocker to change the comment. For
the GPSMAP 7000 series, use the on-screen keyboard. Select Done.
Moving a Saved Waypoint
1. From the Home screen, select
2. Select a waypoint.
3. Select Review > Move.
4. Indicate a new location for the waypoint:
Use Chart
• Select
use the Rocker to select a new location on the chart. For the GPSMAP 7000 series, touch a
new location on the chart. Select
enter Position
• Select
use the Rocker to enter the coordinates of the new location. For the GPSMAP 7000 series,
use the on-screen keyboard. Select Done.
Deleting a Waypoint or an MOB
You can delete a waypoint or an MOB that has been saved.
1. From the Home screen, select
2. Select a waypoint or an MOB.
Review > Delete.
3. Select
Deleting All Waypoints
From the Home screen, select
Copying Waypoints
See "Chartplotter Data Management"

Routes

You can create and save up to 100 routes. Each route can contain up to 250 waypoints.
Creating and Navigating a Route from Your Present Location
You can create and immediately navigate a route on the Navigation chart or the Fishing chart. This
procedure does not save the route or the waypoint data.
Note: The Fishing chart is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select Chart.
2. Select Navigation Chart
3. Complete an action:
For the GPSMAP 6000 series, use the Rocker to select a destination using the cursor ( ).
•
• For the GPSMAP 7000 series, touch a destination using the cursor (
GPSMAP 6000/7000 Series Owner's Manual
®
Information
to move the waypoint while viewing a chart. For the GPSMAP 6000 series,
Move Waypoint.
to move the waypoint using coordinates. For the GPSMAP 6000 series,
Information
Information
(page
or Fishing Chart.
User Data > Waypoints.
>
> User Data > Waypoints.
User Data Clear User Data
> >
69).
Navigation
Waypoints > All.
>
).