Loewe Articos 55 HD Operating Instructions Manual page 25

Operating additional equipment
Switching over the remote control - with
the suggestions by the remote control
Switch on the device to which you want to set
the RC2. Standby is not sufficient!
Press the MOD button with the
MOD
display on. The Mode menu is
displayed.
Mark >RC Setup< with the
rocker.
– Mode –
>RC Setup<
TV
STB
DVD
Press the SET button to call the
SET
RC settings.
Mark the equipment type with
the rocker - VCR, DVD, STB,
DEV1 (device 1), DEV2 (device
2).
– RC Setup –
STB
DEV1
DEV2
HMM
Call the Setup menu of the
SET
appropriate device with the SET
button.
Mark "Step and set" with the
rocker.
Setup DEV2
By code
Step and set
back
Press the SET button to show
SET
the input menu for DEV1 and
DEV2.
Setup DEV2
Enter the type of device here:
Type ?
1 = DVD (DVD player)
1
2 = VCR (video recorder)
3 = STB (Set Top Box)
This setting is not necessary in
VCR, DVD and STB.
Press the SET button to accept
SET
the input.
31599_021_Articos55_GB_(ro)
Setup DEV2
Step ->
accept
1 0 5 3 9
Hold the remote control pointed towards the
device you want to switch over to. Watch the
device. If it switches off to standby when you
press SET, you have found the right code.
SET
Setup DVD
Step ->
accept
0 4 9 0
Setup DVD
Step ->
accept
0 4 9 0
SET
Setup DEV2
By code
Step and set
back
25
You see the Setup menu with
the device type and the
currently set code in the last
line of the menu.
If nothing happens, press the
SET button again (a new code
is sent every time you press
SET) until the device switches
to standby.
When this happens, mark
"accept" with the rocker.
Accept with the SET button. The
Setup menu is displayed again.
Mark "back" with the rocker
and press the SET button. You
will see the Mode menu with
the equipment selection again.
Mark the device to be operated.
24.03.2004, 13:28 Uhr
Hide/show HMM menu items in the TV
menu
You get the HMM menu items when the HMM
function is activated on your remote control!
Press the MOD button with
MOD
the display on. The Mode menu
is displayed. Mark >RC Setup<
with the rocker.
– Mode –
>RC Setup<
TV
STB
DVD
Press the SET button to call
SET
the RC settings.
Mark "HMM" with the rocker.
– RC Setup –
DEV1
DEV2
HMM
Display
Call the menu with the SET
SET
button.
– HMM –
on
off
Mark "on" with the rocker to
have the HMM menu item
displayed or "off" to hide it.
Confirm the selection with the
SET
SET button. You will see the
RC Setup menu again.
Exit the menu with the MOD
button. You will see the Mode
menu again with the
MOD
equipment selection.
25