Setting The Remote Control - Loewe Articos 55 HD Operating Instructions Manual

Daily handling

Setting the remote control

Setting the mode of operation (mode)
You can operate various equipment from Loewe
and other manufacturers with this remote
control. In the ex-factory state Loewe
equipment is set for TV, VCD, DVD, Auro 8116DT
(DVD/Audio), Certos (DEV1, DEV2) which you
can operate directly. The d-box common in
Germany is set for the Set Top Box (STB).
Press the MOD button with
the display on.
MOD
The Mode menu is displayed.
– Mode –
TV
STB
Mark the equipment or the
DVD
VCR
equipment combination you
want to operate with the
rocker.
– Mode –
DVD
VCR
TV+DVD
TV+VCR
Press the SET button to accept
SET
the setting.
Setting the menu language of the remote
control
Press the MOD button with
MOD
the display on. The Mode menu
is displayed. Mark >RC Setup<
with the rocker.
– Mode –
>RC Setup<
TV
STB
DVD
SET
Press the SET button to call
the RC settings.
10
31599_021_Articos55_GB_(ro)
– RC Setup –
HMM
Display
Language
back
SET
– Language –
English
Deutsch
SET
MOD
– Mode –
>RC Setup<
TV
STB
DVD
SET
– TV –
EPG
PIP
SAT-Radio
Video
10
Mark "Language" with the
rocker.
Call the language selection
with the SET button.
Mark "Deutsch" or English"
with the rocker.
Accept the language selection
with the SET button.
Exit the RC settings by pressing
the MOD button.
Mark the equipment to be
operated again with the
rocker...
... and press the SET button to
confirm the selection.
24.03.2004, 13:28 Uhr
Setting the display contrast
Press the MOD button with
MOD
the display on. The Mode menu
is displayed. Mark >RC Setup<
with the rocker.
– Mode –
>RC Setup<
TV
STB
DVD
Press the SET button to call
SET
the RC settings.
Mark "Display" with the
rocker.
– RC Setup –
DEV2
HMM
Display
Language
Call the Display menu with the
SET
SET button.
Mark Contrast+ or Contrast-
with the rocker and
SET
Change the display contrast
with the SET button.
– Display –
Contrast +
Contrast –
accept
V1.1 EU
Mark "accept" with the rocker
and press the SET button.
SET
MOD
Exit the RC settings by pressing
the MOD button.
Mark the equipment to be
operated again with the
rocker...
– Mode –
>RC Setup<
TV
STB
DVD
... and press the SET button to
confirm the selection.
SET