Tools Needed; Materials Needed - Kenmore 63016302400 Installation Manual

TOOLS NEEDED
(All of the tools listed below may or may not be
necessary, depending upon whether the installation
is new or a replacement.)
Hammer Hole Saw
MATERIALS NEEDED
(Dishwasher installation kits are available at your local
Sears store.)
Electrical Supply Cable -
Minimum #14 AWG, 2 conduc-
tor, 1 ground, insulated copper
conductors.
Hot Water Supply Line -
Minimum 3/8" O.D. copper
tubing or metal braided dish-
washer supply line.
Tape Slot
Measure Screwdnver
Shut-off valve and fittings
appropriate for hot water supply
line (copper tubing/compres-
sion fitting, or braided hose).
iiiiiiiiiii_;/i!]!!!!i_
Wire Cutter Wire Stripper
90 ° elbow with 3/8" N.RT. male
threads on one leg, and sized
to fit your water supply line
(copper tubing/compression
fitting, or braided hose) on the
other leg.
<
Pipe Wrench
Adjustable Wrench
Teflon tape or other pipe thread
compound to seal plumbing
connections.
UL listed conduit connector or
strain relief.
Phil@s TOP,(
Screwdriver Screwdriver
Level
2 Tooms Needed/Materials Needed