Standard Cassette - Xante PlateMaker 4 Installation Manual

Hide thumbs Also See for PlateMaker 4:
Table of Contents

Advertisement

6.
Insert the pins on both sides of the cartridge into the guide channels in the
printer (fig. 1.12). Then, slide the cartridge into the printer until it stops and
is seated properly (fig. 1.13).
Fig. 1.13 Insert Toner Cartridge
7.
Close the top cover by pressing down on the center section until the latch
engages (fig. 1.14). Then, close the multipurpose feeder (fig. 1.15).
Fig. 1.15 Close Multipurpose Feeder

Standard Cassette

The standard universal paper cassette feeds up to 500 sheets of 20 lb bond/60 lb
text weight (65 g/m
cassette can handle media weights from 16 - 28 lb (60 to 105 g/m
An optional envelope cassette designed to feed up to 75 envelopes is available for
your printer.
This section describes loading and installing the standard paper cassette. Chapter 5
covers media types and sizes for use in the paper cassettes and available optional
cassettes. Chapter 7 describes installing optional paper feeders and the duplexer.
Make sure all media used meets the guidelines in "Media Specifications" in chapter 5.
Fig. 1.14 Close Top Cover
2
) paper or other paper to a stack height of 2.13" (54 mm). This
2
).
Introduction and Installation 1-11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Filmmaker 4Screenwriter 4

Table of Contents