Table of Contents
Advertisement
Do not touch any parts inside the printer.
3.
Remove the toner cartridge if it is in the printer by grasping its handles and
pulling it slowly out of the printer (fig. 1.9).
Once you begin pulling the cartridge out of the printer, remove it completely. The
cartridge's shutter may not open properly or be damaged if the cartridge is pulled
partially out and then pushed back in the printer.
Fig. 1.9 Remove Toner Cartridge
4.
Remove the new toner cartridge from its package. Then, gently shake the
cartridge several times to distribute toner evenly (fig. 1.10).
Shake the cartridge enough to free any compacted toner. Using the printer with toner
still compacted may damage the cartridge.
5.
Place the toner cartridge on a flat surface; then, grasp the sealing tape's end tab
and pull the tape straight out (fig. 1.11).
If the tape is pulled out at an angle, it may break off inside the cartridge.
Fig. 1.11 Remove Sealing Tape
1-10 Introduction and
Installationbb
Fig. 1.10 Shake Toner Cartridge
Fig. 1.12 Insert Pins into Guide Channels
Hide quick links:
Advertisement
Table of Contents
