A
PPENDIX
zūmo Troubleshooting
Problem/Question
The suction cup will not
stay on my windshield.
My battery gauge does
not seem accurate.
The touch screen is not
responding to my taps
properly.
My phone/headset
will not connect to the
zūmo.
60
Clean the suction cup and windshield with rubbing alcohol. Dry
with a clean, dry cloth. Mount the suction cup as described on
page
47.
Allow the unit to fully discharge and then fully charge it (without
interrupting the charge cycle).
Calibrate the touch screen. Turn the unit off. Press and hold
for about one minute until the Calibration screen appears.
Follow the on-screen instructions.
Verify that the Bluetooth field is set to Enabled.
Make sure your phone is turned on and is less than 10 meters
(about 33 feet) away from your zūmo.
Go to
www.garmin.com/bluetooth
and headsets.
Solution/Answer
for a list of compatible phones
zūmo 500/550 Owner's Manual