Charging The Zūmo; Resetting The Zūmo; Calibrating The Screen; Updating The Zūmo Software - Garmin Zumo 550 Owner's Manual

Charging the zūmo
1. Connect the power cable to a mount
and a power source.
2. Place the zūmo in the mount, and flip
the lever down.
OR
1. Charge the zūmo with the AC
adapter. Plug the small end of the AC
adapter into the mini-USB port on the
bottom of the zūmo.
2. Plug the other end into a standard
wall outlet.
Resetting the zūmo
If your unit freezes up, press and hold
and press

Calibrating the Screen

If the touch screen is not responding
properly, calibrate the touch screen.
Turn the unit off. Press and hold
about one minute until the Calibration
screen appears. Follow the on-screen
instructions.
zūmo 500/550 Owner's Manual
.
Updating the zūmo
Software
1. Go to www.garmin.com/products/
webupdater/
WebUpdater program to your
computer.
2. Connect the zūmo to your computer
using the mini-USB cable.
Mini-USB port for AC adapter, USB Mass
Storage mode, and updating software
3. Run WebUpdater, and follow the
screen prompts. After confirming
that you want to perform an update,
for
WebUpdater automatically downloads
the update and installs it on your
zūmo.
4. Eject and unplug your zūmo (see
page 36).
A
PPENDIX
to download the
49