Dishwasher Cycles; Wash Cycle Information - Bosch SHX68R55UC/67 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Dishwasher
Cycles and Options
Wash Cycles
Heavy: Best for cleaning
items with baked-on
food or grease. These dishes would
normally
require soaking.
Auto: With our most complex
soil sensing capability,
this cycle is perfect
for use with mixed loads of dishware
and varying amounts
of food soil. This is the most flexible
cycle and is a good choice for everyday
use.
Delicate: For delicate
or heirloom
dishware
and silverware
or other
special
items. Always
make sure that the
items are dishwasher
safe. Refer to the Dishware
Materials
section
of this manual for further
information.
Hand
washing
may be the best treatment
for such items.
Normal: Thoroughly
cleans a full load of normally
soiled dishes.
Note: The Energy Guide Label was based on this soil sensing cycle with all available options turned off. As prescribed
in the energy test procedure,
the unit was tested without
any Rinse Aid in the Rinse Aid dispenser. A single dose of
detergent
was used in the Detergent Dispenser, with no detergent used in the prewash.
The test was conducted
with
the upper rack in the lowest position.
Express:
Cleans lightly soiled dishes and reduces overall wash time. Use this cycle to clean glasses and dessert
dishware
that may need to be reused at the same event.
Rinse: Allows you to rinse the food soil off of a partial load and hold them in the dishwasher
until you are ready to
run a full load.
Wash Cycle Options
Delay Start: This option
allows you to delay the start time of your dishwasher
up to 19 hours.
Sanitize:
The Sanitize feature is available only in the Heavy, Auto and Normal cycles. Select one of these cycles, press
the "Sanitize
Option"
button and then press Start to activate the Sanitation
features. The sanitize symbol on the top
display will light at the end of the cycle when sanitation
requirements
are met. The technical
sanitation
measures may
also improve the drying results.
Note: The dishwasher
automatically
defaults to Auto Wash when turned off and back on. If you used the sanitize option
in your last cycle, the dishwasher
will default to Auto Wash with the Sanitize option selected when you turn it on.
Half Load: In the Heavy, Auto and Normal wash cycles, the Half Load option can reduce the energy and water con-
sumption
when washing small, lightly soiled loads that fill approximately
half of the dishwasher's
capacity. To acti-
vate, select the Half Load button in addition
to any of the three cycles listed above.
Wash Cycle Information
Note: To save energy, this dishwasher
has a "Smart Control"
where the sensors in the dishwasher
automatically
adjust
the cycle length, temperature
and water changes based on the amount of food soil and the incoming water tempera-
ture. The "Smart Control"
makes decisions
that can cause the cycle time and water usage to adjust intermittently.
Wash cycle times are based on 120°F water supply. If your household
water supply is different
than 120°F, your
dishwasher's
cycle times may be impacted.
Table 2 - Wash Cycle Information
cycle time
135 min
95-119 min
115 min
80 min
30 min
9 min
cycle time with Half Load
115 min
99 min
90 min
not available
not available
not available
cycle time with Sanitize
135 min
105-135
min
125 min
not available
not available
not available
water consumption
23.2-27.4
L
10.4-22.5
L
8.9-18.3L
13.1 L
13.1 L
4.7 L
6.1-7.2 gal
2.7-5.9 gal
2.4-4.8 gal
3.5 gal
3.5 gal
1.2 gal
wash temperature
66-72°C
55-72°C
50-69°C
50°C
45-72°C
no wash
151-162°F
126-162°F
122-156°F
122°F
113-162°F
rinse temperature
72°C
65-72°C
45-69°C
69°C
50°C
incoming
162°F
156-162°F
113-156°F
156°F
122°F
water temp.
Note: Only sanitizing
cycles have been designed to meet the requirements
of 6 for soil removal and sanitization
effi-
cacy. There is no intention,
either directly or indirectly,
that all cycles have passed sanitization
performance
tests.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents