Bosch SHX68R55UC/67 Use & Care Manual page 10

Table of Contents

Advertisement

Available languages

Available languages

Extra Tall Item Sprinkler
If an item is too tall to be placed in the bottom
rack even with the top rack in the raised
position,
remove the empty
top rack by pulling
it out of the dishwasher
until it stops.
Pull the front of the rack upward
and outward
until the rollers are completely
free of the
roller guides.
Set the top rack aside. Push the roller guides back into the dishwasher.
Insert the Extra
Tall Item Sprinkler
into the top rack spray outlet and turn the sprinkler
clockwise
to lock
into position.
See Figure 2.
Note: Keep the vent on the tub's right side clear by placing tall items such as plastic cutting
boards and tall baking sheets on the bottom rack's left side or center.
Figure 2
To avoid dishwasher
damage, do not reinstall
the top rack without
removing
the Extra
Tall Item Sprinkler.
Flip Tines
The racks consist
of tines that can be folded
down depending
on what you may need to
load in the rack. To fold down, grasp the folding
tine and release from notch.
Push folding
tine downward
to desired
position
as shown in Figure 3.
Do not
block vent
Figure 3
RackMatic
® Adjustable
Upper Rack (model
dependent)
The top rack can be raised or lowered
to accommodate
large items in either
rack.
See Figure 4.
Note: Before pushing the top rack into the dishwasher,
ensure the rack height is the same on
both sides. If the height is not the same on both sides, the dishwasher
door will not shut and
the top rack spray arm will not connect to the water inlet.
To lower the top rack:
1
Pull the top rack out of the dishwasher
until it stops.
2
Press the RackMatic ® adjustable
top rack handles
inward and let the rack drop
gently.
To raise the top rack:
1
Pull the top rack out of the dishwasher
until it stops.
2
Grasp the top of the rack above the RackMatic ® handles
and pull it upward
until the handles
lock the rack into position
(you do not need to press the han-
dles in order to raise the rack).
Figure 4
Manual Adjustable Upper Rack (model dependent)
Remove the empty
upper rack by pulling it out of the dishwasher
until it can be lifted
upward
as shown in Figure 5. Pull the rack up and out until the rollers are completely
free of the roller guides.
Figure 5
Reinsert the rack with the other set of rollers on the roller guides as shown in Figure 6.
Figure 6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents