Battery Installation; Installing The Batteries - Garmin GPS 72 Quick Start Manual

Quick Start

Battery Installation

Remove the batteries from your GPS 72 if you don't expect to
use it for several months. Be sure to observe the proper polarity
when inserting the batteries. Follow the battery manufacturer's
instructions on the proper care and handling of the batteries.
2
Turn D-ring 1/4 turn counter-
clockwise and remove cover

Installing the batteries

Installing the batteries:
1. Remove the Battery Cover by turning the D-ring 1/4 turn counter clockwise and pulling the
cover loose.
2. Check the battery polarity with the molded diagram in the battery compartment and install
the batteries inserting the end toward the spring fi rst.
3. Re-install the Battery Cover by reversing step 1.