Alarm Functions - Kenmore Frost-free chest freezer Use And Care Manual

FREEZERTEMP
QUICK FREEZE _f- _ ALARM
_/ ON _ /C :} //"
r'Jr-F
%\ (_7_:5
: OFF/i \_/ I\ !1 _- j '_'---/
FREEZER TEMP
QUICK FREEZE ff _. ALARM
..... / <..7 (/'l I i< " ._.¢_'_; '_RE==_'
" ON \ /r-', \)
(
'
OFF ,, f LJ / ". /
Figure: 5
FREEZER TEMP
QUICK FREEZE /// _l _''') ALARM
<,..OFF/" o, ,, t_::' ( j _.":-" ') ',R=_E9,
Figure: 3
TEMPERATURE MODE CHANGE
Temperature display can be changed from °F to °C to
°F by pressing the ALARM RESET and DOWN arrow
simultaneously until the control panel beeps. The
display will change to the other mode.
QUICK FREEZE
Quick Freeze enables the compressor to run
continuously to help cool large quantities of warm
(room temperature) foods faster. Always cool down
hot foods to room temperature before placing them in
the freezer. Use this feature just prior to adding large
quantities of unfrozen foods (not to exceed 3
pounds per cubic foot of freezer space). For
example, do not place more than 45 pounds of room
temperature food into a 15 cubic foot freezer.
To activate the Quick Freeze feature, push the
QUICK FREEZE button. The control panel will beep
once and the display will now read "FF" (figure 4),
indicating that Quick Freeze has begun.
For your convenience, Quick Freeze will
automatically turn off after a period of 72 hours and
the freezer will return to the previous temperature
setting. You may deactivate Quick Freeze at any time
by pressing the QUICK FREEZE button. The display
will return to showing the current temperature inside
the freezer and the control panel will beep once.
DISPLAY LOCKOUT
Press and hold the ALARM RESET key until the
control panel beeps to activate or deactivate the
Display Lockout feature which prevents the user from
accidentally changing the temperature and quick
C_l
freeze settings. 'LO (LOCK, figure 5) will be
displayed for 3 seconds indicating that the control
panel is locked. Once in lockout when a key is
pressed, "LO c'' will display for 3 seconds. When the
lockout is deactivated, UL (UNLOCK, figure 6) will
display for 1 second.
Figure: 6
ALARM FUNCTIONS
TEMPERATURE ALARM
If the cabinet temperature rises to a level above 23°F
(-5°C), a high temperature alarm will be activated.
The control panel will beep every 5 seconds, the red
alarm light will glow and the display will flash. This
will continue until the problem is determined,
corrected and temperature once again drops to a
level below 23°F (-5°C). You may stop the beep by
pressing the ALARM RESET button. To also stop the
display from flashing press and hold the ALARM
RESET button until the control panel beeps.
Temperature Alarm will reactivate itself upon
reaching a safe temperature.
DOOR / LID AJAR ALARM
The door/lid alarm will activate if it is ajar for more
than five minutes. The control panel will beep every
five seconds, the red alarm light will glow and the
display will alternate between "d" (Door/Lid, See
figure 7) and the cabinet temperature. Press the
ALARM RESET button to turn the audible alarm
(beep) off. The display will keep flashing and the red
light will stay on. Close the door/lid of the freezer to
return it to normal operation.
FREEZER TEMP
QUICK FREEZE ALARM
<'7\> _i = E=E 9
t O_F>/'_} ( c ! ._ .........
Figure: 7
LOW / NO BATTERY ALARM
The Low/No battery alarm will activate when the
power level of the battery becomes low. The display
will alternate between "b" (Battery, See figure 8) and
the cabinet temperature, the red alarm light will
become illuminated and the control panel will beep
every five seconds. To stop the audible alarm (beep),
press the "ALARM RESET" button. The red alarm
light will remain on and the display will continue to
flash until a new battery is installed. This same alarm
will activate if there is no battery installed.