Table of Contents
Advertisement
Available languages
Available languages
Consumer
Defined Control
Features
Setting
Temperature
Display
-- Fahrenheit
or Celsius:
The BROIL _o_"_ and CLEAN _A_
pads control the Fahrenheit or Celsius temperature display modes, The oven
control can be programmed to display temperatures in Fahrenheit or Celsius, The oven has been preset at the factory to
mNSTRUCTmONS
To change
display
from
Fahrenheit
to Celsius
or
Celsius
to Fahrenheit:
PRESS
DISPLAY
1,
To tell if the display is set for Fahrenheit or Celsius press
_(figure
1 and hold for 7
"550 °" will
in
)
seconds;
appear
the display and a beep will sound, if "F" appears, the display is
set to show temperatures
in Fahrenheit (Figure 2), if "C"
appears, the display is set to show temperatures in Celsius
(FigureS),
2,
Press _LEAN"_ t o switch between Fahrenheit or Celsius display
modes, The display wiii show either "F" (Figure 2) or "C"
(FigureS),
_;_ .....
3,
Press
to accept the change or press _CL"E_'R;
_o rqec_ the
change,
_for
7seconds
Figure 1
Figure 2
Setting
Silent
Control
Operation
The STARTTIME @
and CLEAN _._
pads control the Silent Control operation feature, The Silent Control operation
feature allows the oven control to be operated without sounds or beeps whenever necessary, if desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps,
INSTRUCTIONS
PRESS
DISPLAY
To change
control
from normal
sound
operation
to
silent
control
operation:
1,
To tell if your range is set for normal or silent operation press
and hold @
for 7 seconds, "0:00" wiii appear and "DELAY"
will flash in the display (Figure 4),
2,
Press _.._EA_to switch between normal sound operation and
silent operation mode, The display will show either ":SP" (Figure
5) or ":--" (Figure 6),
if ":SP" appears (Figure 5), the control will operate with normal
sounds and beeps, if ":- -" appears (Figure 6), the control is in
the silent operation mode,
3,
Press
to accept the change or press i..s._oP,_L_,,,
to reject the
change,
for 7seconds
G
STOP'
or
CLEA_
2O
Figure 4
Figure 5
Figure 6
Advertisement
Table of Contents
