Minute Timer; Temperature Conversion (Fahrenheit/ Celcius) - Kenmore 790.9010 series Use & Care Manual

Setting the Clock
FEATURE OVERVIEW

• Minute Timer

Minute Timer
To Set the Minute Timer
1. Push .
2. Push the to increase the time in one minute increments. Push and
hold the to increase the time in 10 minute increments. The timer
can be set for any amount of time from 1 minute to 11 hours and 59
minutes.
Note: If you push the
59 minutes.
3. The display shows the timer count down in minutes until one minute
remains. Then the display will count down in seconds.
4. When the set time has run out, the timer will beep 3 times. It will
then continue to beep 3 times every 60 seconds until
Note: The minute timer does not start or stop cooking. It serves as an
extra timer in the kitchen that will beep when the set time has run out.
The minute timer can be used alone or during any of the other oven
functions. When the minute timer is in use with any other mode, it will be
shown in the display. To view other functions, push the function pad for
that mode.
To Change the Minute Timer while it is in use:
Push and hold the or
To Cancel the Minute Timer before the set time has run out:
Push .
Temperature Conversion (Fahrenheit/Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. To change the
temperature to °C (Celsius) or from °C to °F:
To change the temperature to °C (Celsius) or from °C (Celsius) to °F
(Fahrenheit)
(control should not be in a Bake or Clean mode):
1. Push . "— — —" appears in the display.
2. Push and hold the
3. Push and hold
4. Push the or to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
INSTRUCTIONS
fi rst, the timer will advance to 11 hours and
to increase or decrease the time.
INSTRUCTIONS
until "HI" appears in the display.
until °F or °C appears in the display.
is pushed.
13
PRESS DISPLAY
or
or
PRESS DISPLAY
or