Dryer Use - Kenmore HE4 110.8508 Series Use And Care Manual

DRYER USE
J
AUTO DRY CASUAL
STATUSwETO CYCLES /
DAMVO OMOR_ NORMAL
Coot Oowr_ o o I_
O LESS
C OTFI S DRY O
v*vRi X_OU,_RD O @ JEANS
AUTO DRY
CECK [I[ISCRI!_40
LEVEL
_'RESS _aO I}3 BULKY / BEDDIN
C@4rROLLOCK OO S_CONOS 10 LOCK /
g N LOCi, ONTROL
DELICATE MANUAL EmlMAIFD
CYCLES IIM [IEMAINING
TIMEG DRY _
EXPRESS DRY _ TME
Mo E,
" TOUCH UP
HEAVY DUTY
\
OPTIONS MODIFIERS
Q HIGH
• MEDIUM HIGH
• MEDIUM
• LOW • HIGIt
DAMP DRY SIGNAL
• EXTRA LOW • LOW
_Au/ocvc41sON{Y;
• AIR DRY t OFF
WRINKLE GUARD TEMPERATURE END of CYCLE SIGNAL
(MANUAL CVCtES ONLY}
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Follow these basic steps to start your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Place laundry in dryer and shut door.
3. Press the selected cycle pad. The preset settings for Auto Dry
Cycles or Manual Cycles will glow. The estimated or actual
cycle time (in minutes) will show in the display.
To use an Auto Dry Cycle
• Select an Auto Dry Cycle.
• Select AUTO DRY LEVEL to adjust how dry you want the
load. As the cycle runs, the control senses the dryness of
the load and adjusts the time automatically for the
selected dryness level.
• Select the desired Options.
To make changes during an Auto Dry Cycle:
Adjust Options.
NOTE: Auto Dry Level selections can be made only while
using Auto Dry Cycles. You can select a different dryness
level, depending on your load, by pressing Auto Dry Level
and choosing More or Less. Selecting More or Less
automatically adjusts the sensed time needed.
• MORE
Q
•
LESS
C)
AUTO DRY
LEVEL
PRESS & HOLD 3
S ('ONDS TO LOCK /
UNLOCK CONTROL
20