and Care of Filters
5. a. Install new filters (42-14912)
bottom of the cabinet.
NOTE: The new filters will only fit into
the cabinet one way. Take note of the
inner cabinet detail where the filters
sit. Each pair of filters must be posi-
tioned so the glue beads face out
from each other. Refer to figure 5a.
b. Place the filters into the bottom of the
cabinet so the open pleats slip over
the tabs in the bottom of the cabinet
Repeat for other side.
c. Reposition top filter housings on top
of filters and snap
into front filter
d. Position fan assembly onto the cabi-
net. Make sure the fan venturi (low-
est cylinder section below the fan) is
placed inside the top filter housings.
lid on the fan
f. The unit is ready for use or to be
stored away for next season.
Front Filter Housing
Front of Humidifier
Figure 5a. - Filter Locations Marked X
Top Filter Link Arm